Printed Heated Neck Gaiter, 3 Ways to Wear
One printed tube, three ways to wear it: neck gaiter, face mask or beanie. The 7.4V 2200mAh battery sits in the back pocket and drives a three level button on the side, running roughly 1.5 to 2 hours on high, 2 to 3 hours on medium and 4 to 5 hours on low, with heat between 55-60°C, 45-50°C and 35-40°C depending on the setting. The outer face carries a mountain print, the inside is brushed fleece, and an elastic drawcord cinches the top edge so it stays up in wind. Unisex, one size. Dr. Warm prints and builds these to order with your artwork, colourway, logo, switch type and battery specification.
Specifications
| Voltage Options | 3.7V / 5V USB / 7.4V / 12V / 24V (customizable) |
|---|---|
| Battery Capacity | 2200, 2500, 3200 or 5000mAh at 3.7V, and 2200, 3000 or 4000mAh at 7.4V; 2600mAh available as a custom option (configured to your order) |
| Heat Levels | 3-level adjustable |
| Heating Element | Carbon fiber / graphene (model dependent) |
| Working Temperature | 40–70°C, model specific (see product spec sheet) |
| Waterproof Rating | IPX4 standard / IPX5 optional (where applicable) |
| Charging | Magnetic / USB / DC (model dependent) |
| Warranty | 12 months |
| Certification | CE / UKCA / UL / FCC / RoHS / Reach / UN38.3 / DOE / ISO 9001 / GB 47372-2026 / CCC / TUV |
OEM & ODM Manufacturing Support
Dr. Warm is a direct heated apparel manufacturer in Dongguan, China, supplying heated gear to brands, distributors, and outdoor retailers worldwide since 2013. Every model on this page can be produced under your own label.
- MOQ: 1 unit (in stock) · 100 units (OEM) · 500 units (ODM)
- Customization: logo, colour, size, material, packaging, and user manual
- Sampling: 7–30 days
- Mass production: within 45 days
- Warranty: 12 months
- Factory: 6,000 m² main plant + 2,074 m² electronics workshop · 56 staff · 3 production lines · 336 models across 5 categories
- Quality control: 100% inspection before shipment
Send your target specification and order volume — our engineering team will confirm feasibility, tooling, and lead time.
Frequently Asked Questions
How do I turn the heat on and adjust it?
Press and hold the power button to switch the heating on, then press it again to cycle through the three heat levels. Each unit ships with usage instructions in the box.
Can I replace the battery?
Yes. The battery is detachable on most models, and spare batteries and chargers can be supplied separately.
How should I clean my heated product?
Always remove the battery before cleaning. Most models can be hand washed in cold water and air dried — check the care label for your specific model. Do not machine wash, bleach, or tumble dry.
Is it safe to use in rain or snow?
Yes. The sealed battery and electronics are built for outdoor winter use, and the waterproof rating for each model is listed in the specifications above.
What should I do if the heating stops working?
Contact us for support. Our engineering team can help diagnose battery, wiring, or controller issues remotely, and replacement parts are available.












