ISPO 2026 closed its doors at RAI Amsterdam on 5 November, and the Dr. Warm / S-King team is back from Hall 1 with a full notebook. Over the two expo days (4–5 November), our booth A160-2 welcomed a steady stream of distributors, purchasing managers and brand owners from across Europe — and by closing time, dozens of sample orders had been placed and most of the samples we brought had found new owners.
This post is a recap of what happened at the booth, who visited, what buyers asked about most, and what happens next for those sample orders. If you missed us in Amsterdam, everything we showed at the booth is available through our OEM and ODM services — the conversation does not have to end with the show.

Who Visited the Dr. Warm Booth
Three types of visitors dominated the two show days, and each came with a different agenda:
- Distributors and wholesalers — mostly comparing the product range, checking which categories fit their existing channels, and asking about stock availability and reseller pricing structures.
- Purchasing managers — focused on engineering details: heating zones, temperature control, battery options, certifications and the OEM process from brief to mass production.
- Brand owners — interested in private-label development, custom branding, packaging and how quickly a branded heated apparel line could move from sample to production.
The mix matched what we expected from ISPO: visitors were not browsing for single units, they were scouting manufacturing partners for their next winter collection. That made the conversations concrete — most discussions moved quickly from “what do you sell” to “how would you build it for us”.

Sample Orders and What Sold Out
The clearest signal from ISPO 2026 was on the sample table. Over two days the team logged dozens of sample orders on the spot — visitors who handled the products at the booth and committed to samples before leaving the hall. And by the afternoon of the second day, nearly all the finished samples we brought had been sold or reserved.
For a trade show booth, that outcome says two things. First, the products hold up in person: fabric hand-feel, stitching, controller response and heating performance convinced buyers who could touch and test everything on the spot. Second, demand for heated apparel in the European outdoor and winter-sports market is not just growing — buyers want samples in hand now, before planning their spring sourcing trips.
Every sample order taken at the booth follows the same path as an online enquiry: specification confirmed, sample produced and dispatched, feedback collected, then quotation for bulk production. Stock samples usually ship shortly after the show; customised samples follow the normal sampling cycle once the brief, artwork and target specification are confirmed.
The Questions Buyers Asked Most
Certain topics came up at almost every serious conversation. They are worth restating here, because they are the same questions any heated apparel buyer should ask a manufacturer:
- How many heat levels, and how hot? Our heated apparel runs three heat levels, with temperatures depending on the product model (up to 55°C at the highest setting on many items). Buyers liked being able to test the difference between levels at the booth.
- What batteries do you use? Rechargeable lithium batteries, with capacity customized per model — from compact packs for gloves and socks to 10,000–20,000 mAh power-bank style packs for jackets and vests. Charging time, output voltage and connector type vary by model and are specified per product.
- What is the MOQ? 100 pieces for OEM orders, 500 pieces for full ODM development, and single-piece availability for stock items. For many first-time buyers, starting with a stock sample before committing to OEM volume is the normal path.
- Which certifications do you hold? CE, UKCA, UL, FCC, RoHS, Reach, UN38.3, DOE and ISO 9001, plus GB 47372-2026 with CCC on the battery side. Certificates are shared with buyers on request together with the relevant test reports.
- How long does development take? Sampling runs 7–30 days depending on complexity; OEM production 20–25 days; full ODM development 50–60 days; bulk production orders within 45 days. Every quote includes a realistic timeline instead of a best-case number.
Products That Drew the Most Attention
On the apparel wall, heated gloves and heated socks were the first products visitors picked up, but the conversations that turned into sample orders spread across the whole range — jackets, vests, base layers and heated insoles from the S-King side of the booth.
The manufacturing story mattered as much as the products. The team walked visitors through what sits behind every garment: production across 3 lines in a 6,000 m² main plant plus a 2,074 m² electronics assembly workshop, a team of 56 with 8 in-house R&D engineers, and heated products supplied Since 2013. For purchasing managers, that combination — garment production and electronics assembly under one roof — is usually the deciding factor between a trading company and a factory partner.

What Happens After the Show
The sample orders collected in Amsterdam are now moving into the normal workflow: stock samples dispatching this month, customised samples entering the sampling cycle, and quotations for bulk production following once feedback comes back. This is the standard rhythm after every exhibition — the show starts the conversation, the sample proves the product, and the production order confirms the partnership.
If you were at ISPO and did not make it to Hall 1, or you are planning a heated apparel line for next winter, you can still get the same conversation: write to us with your product category, target market and expected volume, and we will match you with the right engineer and send samples for evaluation. The team that staffed the booth is the same team that handles OEM and ODM projects year-round.

The brand-side recap of the booth and the product lines on show is published on our brand site: Dr. Warm at ISPO 2026, Amsterdam.
Frequently Asked Questions
Where was the Dr. Warm booth at ISPO 2026?
Hall 1, Booth A160-2 at RAI Amsterdam. The expo ran on 4 and 5 November 2026, and the booth was staffed by the Dr. Warm / S-King team on both days.
Did Dr. Warm collect orders at the show?
Yes. Dozens of sample orders were placed at the booth during the two expo days, and most of the finished samples brought to Amsterdam were sold or reserved by the end of the show. Sample orders follow the standard workflow: specification confirmed, sample dispatched, feedback collected, then bulk quotation.
I missed ISPO 2026. Can I still request samples?
Yes. Write to us with your product category, target market and expected volume. Stock samples can usually be dispatched shortly after the exhibition, while customised samples follow the normal sampling cycle once the brief, artwork and target specification are confirmed.
Which products can be customised after the show?
The full range shown at ISPO — heated gloves, socks, jackets, vests, base layers and heated insoles — is available for OEM and ODM customisation: heating zones, temperature control, battery configuration, branding, packaging and size/color options are all specified per project.




