Quick answer: Yes — heated gloves can be built for bulk OEM orders. On this site the MOQ is 100 pieces for OEM, 500 pieces for full ODM and 1 piece for a stock sample. Customisation covers the glove pattern, shell and lining, heating zones, battery platform, controller, logo and retail packaging. Sampling takes 7-30 days; OEM production takes 20-25 days.
This guide is for winter-gear retailers and distributors putting a first enquiry together. It separates what can be changed cheaply from what requires engineering, and sets out the quality checks a bulk order should pass. For the wider development path see our OEM and ODM service and the factory where both garment and electronics are built.
OEM vs ODM for Heated Gloves
| OEM | Full ODM | |
|---|---|---|
| What it is | Brand or modify an existing glove platform | Develop a new glove and heating system from a brief |
| MOQ | 100 pieces | 500 pieces |
| Sampling | 7-30 days | Full development 50-60 days |
| Bulk production | 20-25 days | Standard bulk orders within 45 days |
| Changes available | Logo, colour, fabric, heating-zone count, battery, packaging | Pattern, tooling, element layout, controller firmware, fabrics, packaging |
Most retailers start with OEM. It gets a branded product to market in one sampling cycle and uses a heating system that has already been validated. ODM makes sense when the fit, zone layout or controller behaviour is itself the differentiator — for example a liner thin enough to sit under a ski glove, or a mitten with a dedicated thumb zone.
What Winter Gear Retailers Can Customise
- Pattern and fit: full-finger gloves, mittens, thin liners, gauntlet cuffs for skiing, short cuffs for commuting; men’s, women’s or unisex size runs.
- Shell and lining: leather, softshell, windproof membrane, fleece or knit lining, reinforced palm, touchscreen-compatible fingertips, reflective piping.
- Heating layout: palm and fingers, full hand back and fingers, or back-of-hand only; the element drawing is confirmed against a physical sample.
- Power system: 3.7V or 7.4V platforms (7.4V is standard for gloves), with battery capacity configured to the order; button, remote or app control on suitable lines.
- Brand layer: printed or embroidered logos, woven and care labels, custom zipper pulls, battery branding, instruction manuals, retail boxes, barcode labels.

Electrical Decisions That Shape the Quote
A glove is a small garment with a lot of bending. The heating wire runs through the fingers, which flex thousands of times a day, so element construction and strain relief matter more here than in a jacket. Most heated gloves use a 7.4V platform with an 8.4V / 1.5A charger; 3.7V is used on compact accessories. Standard platforms are 3.7V, 5V, 7.4V and 12V, with 24V available as a custom build for industrial use — never write a voltage range.
Battery capacity is configured to the order, not fixed. Runtime is the result of capacity, the number of active zones, the selected heat level and ambient temperature, so a meaningful runtime figure has to name the heat level. On the standard glove platforms, three levels run Low 35-40°C, Medium 45-50°C and High 55-60°C; a smaller group runs Low 40-45°C, Medium 50-55°C and High 55-60°C, and one high-output model reaches 60-65°C on High. All values are in degrees Celsius and are specified per model. A technical walkthrough of the elements, controller and wiring is in our heating system guide.

How Bulk Quality Is Controlled
| Check | What it catches |
|---|---|
| Flexing and bend testing | Wire fatigue at the finger joints after repeated bending |
| Heating-uniformity testing | Cold spots between fingers or across the palm |
| Overcharge, over-discharge and short-circuit protection | Uncontrolled output at the cell |
| Over-temperature cutoff and thermal monitoring | A local hot spot escalating under a compressed cuff |
| Battery and charger compatibility, final aging inspection | Mismatched or degraded packs before shipment |
| IPX4 water-resistance verification | Moisture ingress around the connector; IPX5 is optional |
Warranty on finished products is 12 months and cells are rated for 500+ charge cycles. Buyers commonly request CE, UKCA, UL, FCC, RoHS, Reach, UN38.3, DOE and ISO 9001, plus GB 47372-2026 with CCC on the battery; see what each certification covers. UN38.3 documentation and the SDS accompany lithium battery shipments — the SDS is a shipping document, not a certification. Certificate holder for the conformity documentation is Dongguan S-KING Limited; production is carried out by Dongguan Ditewang Intelligent Technology Co., Ltd.
How Retailers Should Prepare an Enquiry
- Target market and the compliance documents your channel requires
- Glove type (full-finger, mitten, liner), intended activity and target retail price band
- Expected quantity and whether this is OEM branding or full ODM development
- Preferred heating zones, control method and runtime target at a named heat level
- Size run, logo/artwork files and packaging requirements
Sending those five inputs up front avoids a quotation built on assumptions. For end-user comparisons and runtime questions, see heated gloves vs regular winter gloves and how long a charge lasts.

Production runs across 3 lines in a 6,000 m² main plant plus a separate 2,074 m² electronics assembly workshop, with a team of 56 and 8 in-house R&D engineers. Annual capacity exceeds 1,000,000 pieces, and Dr. Warm has supplied heated products Since 2013. Building the garment and the heating system under one roof is why a failed flex test can be traced to a station and corrected before a bulk run.
Frequently Asked Questions
Can heated gloves be made for bulk OEM orders?
Yes. OEM orders start at 100 pieces and cover logo placement, colourways, fabrics, heating-zone layout, battery platform, controller type and retail packaging. Full ODM development of a new glove pattern starts at 500 pieces, and a single stock sample is available for evaluation.
What is the minimum order for custom heated gloves?
100 pieces for OEM branding or modification of an existing glove, 500 pieces for full ODM development, and 1 piece for a stock sample. Sampling takes 7-30 days and OEM production 20-25 days.
Can you match my brand on the gloves and packaging?
Yes. Printed or embroidered logos, woven labels, custom zipper pulls, battery branding, instruction manuals, retail boxes and barcode labels can all be matched to your brand. Artwork approval is usually the fastest part of the project.
Which electrical platform should a retail glove use?
Most heated gloves use a 7.4V platform with an 8.4V / 1.5A charger, while some compact accessories use 3.7V. Battery capacity is configured to the order rather than fixed, so runtime depends on capacity, active heating zones, heat level and ambient temperature.
Planning a private-label glove line? Send us your brief with the five inputs above and we will come back with a development path and a sample plan.




